cracking process中文是什么意思

• 干馏法
• 裂化法
• 裂化过程
• 裂解法
• 热裂法

• "cracking"中文翻译    adj. 分裂的，分解的；〔美俚〕极快的，猛烈的。 cr ...
• "process"中文翻译    vi. 〔口语〕排队走，列队行进 〔procession ...
• "acid cracking process" 中文翻译 :    酸裂化法
• "alco gyro cracking process" 中文翻译 :    阿尔柯-杰罗气相裂化过程
• "atwood cracking process" 中文翻译 :    阿特伍德裂化过程
• "burton cracking process" 中文翻译 :    柏顿裂化过程; 柏顿热裂化过程
• "burton thermal cracking process" 中文翻译 :    伯顿热裂解工艺
• "catalytic cracking process" 中文翻译 :    催化裂化法; 催化裂化过程; 催裂化法
• "coil and quench cracking process" 中文翻译 :    热裂化过程的一种
• "cycle efficiency of cracking process" 中文翻译 :    裂化过程的循环效率
• "cycloversion catalytic cracking process" 中文翻译 :    固定床矾土催化剂催化裂化法; 固定床矾土催化裂化过程
• "de florez cracking process" 中文翻译 :    德-弗劳瑞兹裂化过程; 德-弗劳瑞兹汽相裂化过程
• "deecatalytic cracking process" 中文翻译 :    催化裂解工艺
• "distillate selective cracking process" 中文翻译 :    柴油选择裂化工艺
• "dubbs cracking process" 中文翻译 :    杜布斯式热裂化过程
• "flame cracking process" 中文翻译 :    火焰热解法
• "fleming cracking process" 中文翻译 :    弗莱敏液相热裂化过程
• "fluid catalystic cracking process" 中文翻译 :    流化催化裂化过程
• "fluid catalytic cracking process" 中文翻译 :    流化床催化过程
• "fluid cracking process" 中文翻译 :    流化催化裂化过程
• "gas oil cracking process" 中文翻译 :    瓦斯油裂化法
• "gyro cracking process" 中文翻译 :    贾罗汽相热裂化过程; 杰罗气相裂化过程
• "heavy oil cracking process" 中文翻译 :    重残油催化裂化过程
• "houdry catalytic cracking process" 中文翻译 :    胡得利催化裂化过程; 胡得利固定床催化裂化过程
• "kellog cracking process" 中文翻译 :    开洛裂炼法

• Simulation of cracking processes of rock materials by lattice model
  基于格构模型的岩石类材料开裂数值模拟
• Petroleum distillates are a huge category that includes thousands of products . in fact , the term refers to anything that comes from the distillation , or cracking process , of petroleum crude oil
  石油蒸馏物是一个范围很大的种类，包括上千种产品。实际上，它是指原油的蒸馏或裂变过程。
• Many innovations have contributed to these achievements , but arguably the greatest was the development of catalytic cracking processes , especially those based on zeolites ( 2 )
  有许多的创新都对这些成就有贡献，但其中可以论证的最大的创新应该是接触裂化方法特别是以各种沸石为基础的方法的开发。
• The overall cracking model was constructed on the basis of the kinetic models of each lump . this five - lump model was used to simulate the cracking process of tars from different sources and under different cracking conditions , and good results were achieved by comparison with experiment data
  利用实验数据拟合得到各集总转化的动力学参数，并以此构建各集总转化过程的动力学模型和整体焦油转化过程的动力学模型，并取得了良好的效果。
• A novel model for residual fluid catalytic cracking process ( rfcc ) is proposed . it divides the whole reactor into two part : the riser as ideal pipe flow reactor and the sett - ler as ideal cstr . the model contains six lumps reaction kinetics with serial and parallel network
  通过将实际装置中发生裂化反应的提升管和沉降段反应器分别考虑为理想的活塞流反应器和连续搅拌式反应器，建立了简化的渣油催化裂化反应6集总组分的串行和并行反应动力学网络模型。
• The process mechanism of tar cracking was investigated in kinetics view , in which a five - lump kinetic model was erected . the whole tar was divided into five lumps of different kinetic behavior in cracking process , and the kinetic parameters used to construct the kinetic model of each lump was achieved by optimally fitting experiment data
  在从动力学角度研究焦油催化裂化过程中，采用集总的思想将整体焦油划分为具有不同动力学行为的五个集总，集总中的各组分的动力学行为都由集总来代表。
• The experiments showed that the cracking process of such restrained beams in this paper can be divided into three phases , that is , formation of the fanning zones , initialization and development of splitting cracks along longitudinal reinforcement , and accelerating development of the critical crack and / or cracks ( diagonal , flexural ) . during the last two phases , it was observed that further opening of some cracks led to some
  研究结果表明，钢筋混凝土有腹筋约束梁的裂缝开展过程大致可分为扇形区逐步形成、劈裂裂缝出现和发展、最终临界裂缝（斜裂缝或弯曲裂缝）加速发展至破坏等阶段。在后两个阶段中存在某些裂缝发展减弱同时某些裂缝迅速开展的“此消彼涨”的现象。
• Two different reinforcing methodologies are applied : modification of the overlay characteristics by adding chopped glass fibers to the hot mixture asphalt ( hma ) and reinforcing asphalt overlay with glass grids . theory of fracture mechanics ( fm ) is employed to determine crack growth rates for the suggested anti - cracking overlay systems . asphalt mixture designing tests , three point bending tests and fatigue crack propagation tests were carried out . the critical stress intensity factors kic are determined for plain and reinforced asphalt concrete . depending on the fatigue crack propagation , the crack growth rate is determined for each type of anti - cracking system and the cracking process is also analyzed . one of the significant points in this study is the attempt to give better understanding of the crack propagation for multilayer asphaltic overlay or what are suggested herein to be called composite structure anti - cracking overlay system . the results indicate that the reinforcing materials improve anti - cracking characteristics of the asphalt concrete . composite structure anti - cracking overlay gives a good solution for the reflective cracking phenomenon over old cracked pavements
  利用2种不同的方法加筋沥青罩面:在沥青混合料中加入短切玻璃纤维改善沥青混凝土的特性,采用玻璃格珊加筋沥青混凝土.应用断裂力学方法分析沥青路面裂缝扩展机理.采用沥青混合料设计试验、三点弯曲试验和疲劳裂缝扩展试验,确定加筋沥青混凝土的临界应力强度因子kic ,测量每一种沥青罩面抗裂系统的裂缝扩展速率.本研究的主要特点是提出复合型抗裂罩面系统,分析了多层加筋沥青罩面裂缝扩展过程,推荐了若干沥青路面抗裂系统.结果证明,加筋材料可以提高沥青罩面的抗裂特性,复合型抗裂罩面系统能够有效地阻止反射裂缝的扩展
• The first part comprises industrial pta oxidation process modeling , residual fluid catalytic cracking process modeling , complex distillation modeling and analysis , the application of pta oxidation process soft - sensor technology . in the second one , the infeasibility degree based genetic algorithm is proposed to handle constrained optimization problem in engineering cases and the neighborhood and archive based genetic algorithm and its variant are proposed to treat the multi - objective optimization problem . with that , the pta oxidation process is regarded as a benchmark for the application of the proposed multi - objective optimization genetic algorithm
  论文内容分为两部分，第一部分对包括三个典型的工业过程， pta氧化反应器、渣油催化裂化反应系统和复合式精馏塔进行分析、建模以及pta氧化过程的软测量工程实施；第二部分分别提出了基于进化算法解决工业过程中普遍存在的约束优化问题和多目标优化问题的过程优化算法? ?基于不可行度选择遗传算法和基于邻域和存档操作遗传算法，并利用该算法对工业pta氧化过程操作进行多目标优化研究。
• The results reveal that the five - lump model can work with only the compositional information of the raw tar as the input parameters , and it can be used to predict the results of different cracking conditions and the final composition of residual tar . the simulation of the cracking process was satisfying
  结果表明，五集总模型的应用可独立于焦油的来源和性质，对焦油转化过程动力学行为描述的准确度明显高于整体转化模型，且该模型不仅对裂化过程进行动力学模拟和结果预测，还可给出转化后焦油的构成等重要信息。

• cracking process перевод